Thickness
Model #
Model #
S 75/4
Ideal for straight parrallel cuts
Very fast cuts in hard and soft wood,
particleboard 1/4" - 2-5/32;
Also suitable for plunge and curve cutting.
Side set and ground.
2-5/32
S 75/4 25/pack
486 962
26.25
S 105/4
Ideal for straight parrallel cuts
Very fast cuts in hard and soft wood,
particleboard 1/4" - 3-11/32;
Side set and ground.
S 75/2,5
Ideal for straight, fine cuts.
Hard and soft wood, plastics, plywood,
laminated particleboard 3/16 - 1-1/4;
Use splinter guard for splinter-free cuts!
Ground teeth and taper ground backing.
2-5/32
S 75/2.5 25/pack
486-963
29.75
HS 75/2,5 bi
Ideal for straight, fine cuts.
Plywood, plastics, fiberboard, laminated
particleboard 3/16 - 1-1/4; fiberglass 1/16 -
5/8. Use splinter guard for splinter-free cuts!
Ground teeth and taper ground backing.
Bi-metal blades will last up to 10 times longer
than HCS (high carbon steel blade)
S 75/4 FS
Ideal for parallel and angled cuts.
Straight, clean cuts in hard and soft wood,
plastics, particleboard 1/4" - 2-5/32. Use
parallel guide. Ground teeth and taper ground
backing.
2-5/32
S 75/4 FS 20/pack
490 256
31.50
S 75/4 FSG
S 105/4 FSG
Ideal for fast parallel, angle and curve cutting.
Super-fast cuts in hard and soft wood, plastics
particleboard 1/4" - 2-5/32.
Ground teeth and taper ground backing.
3-11/32
3-11/32
4-3/4
S 105/4 FSG 5/pack
S 105/4 FSG 20/pack
S 145/4 FSG 3/pack
486 552
488 015
490 179
14.25
54.25
17.75
Festool
Type
Blades
S 75/4 K
For curve cutting
Very fast clean cuts in hard and soft wood,
particleboard 1/4 - 2-5/32; plastics.
Side set ground.
2-5/32
S 75/4 K 25/pack
586 965
29.00
S 50/1,4 K
Pointed teeth for fine, splinter-free cuts on both
sides of the work piece.
Curve cutting in plywood, plastics, laminated
particleboard, hard and soft wood 5/64 - 3/4.
Work without orbiting action.
HS 75/4 bi
Ideal for straight, parallel cuts.
Very fast, clean cuts in particleboard, hard and soft wood, wood with nails 1/4" - 2-5/32.
Also suitqble for plunge and curve cutting. Side set and ground. Bi-metal blade will last up to 10 times longer than HCS (high carbon steel)
HS 75/3 BI
Ideal for aluminum
Fast, straight cuts (easy curve cuts, flexible and break resistant) in aluminum 3/16 - 5/8; plastic 3/16 - 1-1/4; fiberglass, lead, tin 3/16 - 3/4. Side set and milled.
HS 60/1,2 BI
For thin metal.
Straight cuts in metal, non-ferrous metal, aluminum 1/16 - 1/8.
Wavy set and milled.
1-3/16
HS 60/1,2 bi 25/pack
488 016
43.00
HS 105/1,2 BI
Ideal for sandwich material.
Straight cuts (easy curve cuts, flexible and break resistant) in metal, non-ferrous metal, aluminum 1/16 - 1/8; sandwich materials up to 3-11/32. Wavy set and milled.
HS 155/1,2 BI
Ideal for sandwich material up to 5-5/16
Festool
Type
Blades
HS 60/1,4 BI VA
For stainless stell up to 1.5mm thick.
Straight cuts (easy curve cuts, flexible and break resistant) in metal, non-ferrous metal and stainless steel up to 1/16 thick. Work without orbital action. Wavy set and milled. Longlife Vanadium tipped blade.
Festool
Type
Blades
HS 60/2 BI
Ideal for thick material.
Straight cuts (easy curve cuts, flexible and break resistant) in metal, non-ferrous metal, aluminum 1/8 - 1/4"; plexiglas 1/8 - 3/4". Wavy set and milled
HS 105/2 BI
Ideal for sandwich material.
Straight cuts (easy curve cuts, flexible and break resistant) in metal, non-ferrous metal, aluminum 5/64 - 1/4"; sandwich materials 5/64 - 3-11/32. Wavy set and milled.
HM 75/4,5
Ideal for fiberglass
Fast cuts in abrasive materials; in fiberglass 1/4" - 3/4". Carbide tipped, side set.
HM 105/4,5
Ideal for fiberglass
Fast, coarse cuts in abrasive materials; in fiberglass 1/4" - 2-3/8; cement bonded particleboaed, light building blocks, bricks 1/4" - 3-1/8. Carbide tipped, side set.
R 54 G
Ideal for abrasive materials
Fine straight and curved cuts (file effect) into ceramics, glass, fiberglass 3/64 - 5/8". Ceramic coated.